Correcting The Keystone Distortion - Toshiba TLP780U Owner's Manual

Correcting the keystone distortion

Remote control
INPUT ON/STANDBY
LASER
1
AUTO
KEYSTONE
SET
L-CLICK R-CLICK
VOLUME/ADJUST
2 3
MENU ENTER EXIT
PIP FREEZE
RESIZE
CALL MUTE
Control panel
(Main unit side)
ON / STANDBY
VOL / ADJ
2 3
A picture may be expanded on the upper side if projected upward from the projector
lifted up by the foot adjuster. The projector can correct this keystone distortion.
1
KEYSTONE
KEYSTONE
ENTER
2
ENTER
EXIT
3
EXIT
1
Before correcting
Press KEYSTONE
The keystone adjustment menu appears, with the "Auto. V-
keystone" being selected. (This menu is the same as the
sub-menu which is displayed when "Correct the keystone
distortion of the screen" is selected from GUIDE MENU.
Press ENTER
The vertical keystone distortion on the picture projected is
automatically corrected.
The icon appears while the keystone correction is
executing.
When the correction is finished, the menu for selecting "V-
keystone" or "H-keystone" by manual adjustment appears, with
the former being selected.
Confirm the keystone distortion
When no more adjustment is needed, press the EXIT button
repeatedly until the menu disappears.
When the keystone distortion is not corrected properly, adjust
it according to the next procedure.
35
CONTENTS
After correcting
45 )
Continued