How to use the output connector
You can output video signal to a computer monitor, etc.
Check that the power for the projector and the equipments is off before connecting the cables.
USB
MONITOR
OUT
CONTROL
Notes
• The analog RGB signals or Y/P
from the MONITOR OUT connector. If neither of these input sources is selected, the signal of the COMPUTER IN 1 connector is output. (Digital RGB
signals are not output.)
• Signals are output from the MONITOR OUT connector even when in the standby mode.
• A general computer monitor may not display a normal picture with Y/P
COMPUTER IN 1
COMPUTER IN 2
( Y/P
)
/P
B
R
AUDIO
VIDEO IN
IN
R - AUDIO - L
VIDEO
S-VIDEO
To MONITOR OUT connector
Be sure to connect in the
proper direction.
/P
signals of the COMPUTER IN 1 or COMPUTER IN 2 connector selected by the input select operation are output
B
R
Computer monitor, etc.
/P
signals.
B
R
27
CONTENTS
Continued