How To Use The Output Connector; Monitor Out Connector - Toshiba TLP380 Owner's Manual

How to use the output connector

You can output video signals to a computer monitor, etc.
Check that the power supplies for the projector and for the equipments are off before connecting the cables.
USB
Notes
• The analog RGB signals or Y/P
from the MONITOR OUT connector. If neither of these input sources is selected, the signal of the COMPUTER IN 1 connector is output. (Digital RGB
signals are not output.)
• Signals are output from the MONITOR OUT connector even when in the standby mode.
• An ordinary computer monitor may not display a normal picture with Y/P
MONITOR COMPUTER IN 1 COMPUTER IN 2
OUT ( Y/P /P )
B R
CONTROL
AUDIO VIDEO IN
R - AUDIO - L VIDEO S-VIDEO
IN
To MONITOR OUT connector
Be sure to connect in the proper
direction.
/P signals of the COMPUTER IN 1 or COMPUTER IN 2 connector selected by the input select operation are output
B R
/P signals.
B R
CONTENTS
Computer monitor, etc.
27