Table of Contents
Advertisement
Entering
installation parameters
Chapter 2 • Pointing the antenna
8
1037663-0001 Revision A
This section explains how to obtain the proper azimuth and
elevation coordinates to point the antenna at the satellite from the
antenna site, using the LUI to enter the necessary parameters.
1. Use your GPS to determine the latitude and longitude of the
installation site, and record them in the spaces provided
below.
Latitude: ________Degrees _____Minutes _____Fractional mins
Longitude: ______Degrees _____Minutes _____Fractional mins
2. Using an Ethernet cable, connect your laptop to the indoor
unit (IDU) LAN port as shown in Figure 3.
Note: The laptop must be connected directly to the IDU
(without an intervening router).
Figure 3: Connecting the installer laptop to the IDU
3. On your laptop, open a web browser (Internet Explorer 6 or
higher, or Mozilla 1.8 or higher).
4. Type 169.254.0.1 in the browser address bar and press
Enter.
5. At the LUI System Control Center home page, click the small
icon near the upper right area of the screen, as shown in
Figure 4.
(HN9000 shown)
Advertisement
Table of Contents
