Configuration Of The Dlan Network - Devolo MicroLink dLAN Ethernet Manual

4.2.2

Configuration of the dLAN network

Please have the previously noted dLAN adapters security IDs ready. The
MicroLink dLAN Configuration Wizard requires them for configuration of the
network. You will find the security ID on the bottom of the device.
The dLAN adapter connected directly to your computer is configured auto-
matically.
Note that all the dLAN adapters that you want to add to your network must
also be physically connected.
The configuration of the dLAN network can be changed or updated at any
time. To do this repeat the configuration process as described above.
After a successful installation, start the devolo tools with Start
grams devolo
MicroLink Informer.
Start the MicroLink dLAN Configuration Wizard under Start
grams devolo MicroLink dLAN Configuration Wizard.
Confirm with Next.
The MicroLink dLAN Configuration Wizard starts the network analysis
and searches for dLAN adapters on your network.
Now enter in sequence the security IDs of the dLAN adapters that are to
be included into a network and click Add. Click Next when you have
entered all desired dLAN adapters.
In the following dialog box enter your network password and confirm your
input with Next.
Your network password is now assigned to the dLAN adapters selected
for the network.
Exit securing your network by clicking Finish. Your dLAN network is now
secure against unauthorized access from outside.
|
devolo MicroLink dLAN Ethernet - devolo MicroLink dLAN USB
MicroLink dLAN Configuration Wizard or
|
23
devolo tools
Pro-
Pro-
|