Encrypting The Dlan 200 Av Network With The Dlan Configuration Wizard - Devolo 200 AVplus User Manual

|
18
Security in the dLAN
If you have already secured your existing dLAN 200 AVplus network using the
encryption button, use the same method to integrate further adapters. Once you
have successfully connected the new dLAN 200 AVplus, first press the encryp-
tion button ( > one second) of one of your network's existing adapters, then
press the encryption button ( > one second) of your new dLAN 200 AVplus
within two minutes. That's it! The new dLAN 200 AVplus is now integrated in
your network.
To integrate additional dLAN 200 AVplus adapters in your network, repeat the
above steps.
Removing a dLAN 200 AVplus from the network
To remove a dLAN 200 AVplus adapter from an existing network, press its
encryption button for at least ten seconds. The device will be assigned a new
randomly generated password and will thus no longer be able to access the net-
work. To integrate the device into a different dLAN 200 AV network, follow the
steps described under or , depending on whether you are setting up a new
network or adding the adapter to an existing one.
If you would like to combine a dLAN 200 AVplus with older devolo dLAN 200
AV devices in a network, update the firmware of the dLAN 200 AV devices first.
To do so, carry out the 'Firmware update' as described in chapter 2.4.1.
3.2 Encrypting the dLAN 200 AV network with the
dLAN Configuration Wizard
When using other dLAN 200 AV devices without encryption buttons together
with the dLAN 200 AVplus, data encryption of the entire network can only be
| |
devolo dLAN 200 AVplus