Connecting The Microlink Dlan Usb Adapter; Driver Installation-Microlink Dlan Usb - Devolo MicroLink dLAN Ethernet Manual

No drivers are required for installation of the MicroLink dLAN Ethernet
adapter.
2.3.2

Connecting the MicroLink dLAN USB adapter

Before connecting the dLAN adapter please note its security ID and keep it
available for configuration of the network. The security ID can be found on the
bottom of the dLAN adapter.
2.3.3 Driver installation—MicroLink dLAN USB
Plug&play installation
The MicroLink dLAN USB supports plug&play. This makes installation much
easier. Windows wizards guide you through the installation process and
request the required data.
The driver installation process is different in different operating systems. The
procedure is described separately below for the various operating systems.
Installation under Windows 98SE
Then install the devolo tools MicroLink dLAN Configuration Wizard and
MicroLink Informer. For more information see the 'devolo tools' chapter.
With the computer running connect the MicroLink dLAN USB adapter to
a USB port of the computer with the network cable (included).
Plug the MicroLink dLAN USB adapter into a convenient power socket.
Now install the drivers in the desired operating system.
Then install the devolo tools MicroLink dLAN Configuration Wizard and
MicroLink Informer. For more information see the 'devolo tools' chapter.
Put the devolo product CD in your CD-ROM drive.
Windows starts the hardware wizard and reports that new hardware has
been detected. Confirm by clicking Next.
Windows provides you with two options for searching for drivers. Select
the 'Search for the best driver for your device (Recommended)' option and
click Next.
|
devolo MicroLink dLAN Ethernet - devolo MicroLink dLAN USB
|
Connection and installation
13
|