Devolo MicroLink dLAN Ethernet Manual page 15

Installation under Windows XP
During the installation Windows will inform you that the software that you
are installing has not passed the Windows logo test. Depending on the con-
figuration of your computer this message may appear more than once.
Always continue with the installation by selecting Continue Installation 'in
the Windows Logo Certification' dialog box.
Put the devolo product CD in your CD-ROM drive.
Windows XP starts the hardware wizard and reports that new hardware
has been detected.
In the following dialog window activate the option 'Install the software
automatically (Recommended)'. Click Next. The driver installation is
started.
By clicking Finish you'll exit the installation.
For more information on the installation of the devolo tools MicroLink dLAN
Configuration Wizard and MicroLink Informer please see the 'devolo tools'
chapter.
|
devolo MicroLink dLAN Ethernet - devolo MicroLink dLAN USB
|
Connection and installation
15
|