Warning - Graco PRO Auto Xs Series Instructions-Parts List Manual

Warning

WARNING
Fire, Explosion, and Electric Shock Hazard
Flammable fumes, such as solvent and paint fumes, in work area can ignite or explode. To help
prevent fire and explosion:
• Electrostatic equipment must be used only by trained, qualified personnel who understand the
requirements of this manual.
• Ground equipment, personnel, object being sprayed, and conductive objects in work area. See
Grounding instructions.
• Only use grounded Graco conductive air supply hoses.
• Check gun and hose resistance and electrical grounding daily.
• Use and clean equipment only in well ventilated area.
• Interlock the gun air supply to prevent operation unless ventilating fans are on.
• Use cleaning solvents with highest possible flash point when flushing or cleaning equipment.
To comply with EN50050 requirements, cleaning solvents must have a flash point at least 5°C
above ambient temperature.
• Always turn the electrostatics off when flushing, cleaning or servicing equipment.
• If there is static sparking or you feel a shock, stop operation immediately. Do not use equip-
ment until you identify and correct the problem.
• Eliminate all ignition sources; such as pilot lights, cigarettes, portable electric lamps, and plas-
tic drop cloths (potential static arc).
• Do not plug or unplug power cords or turn lights on or off when flammable fumes are present.
• Keep work area free of debris, including solvent, rags and gasoline.
• Keep a working fire extinguisher in the work area.
Toxic Fluid Hazard
Hazardous fluids or toxic fumes can cause a serious injury or death if splashed in the eyes or on
the skin, swallowed, or inhaled.
• Know the specific hazards of the fluid you are using. Read the fluid manufacturer's warnings.
• Store hazardous fluid in an approved container. Dispose of the hazardous fluid according to all
local, state, and national guidelines.
• Wear appropriate protective clothing, gloves, eyewear, and respirator.
4 309297K