Advertisement
A-3
FIGURE A.1
D. Assemble an electrode, nozzle, shield cup and drag
cup on the torch as shown in the Figure A.1. First
insert the electrode with the hafnium insert facing
out. Then, place the nozzle over the electrode and
allow it to seat against the swirl ring. Place the
shield cup over the nozzle and tighten firmly by
hand. Slide the drag cup onto the shield cup for
drag cutting.
E. Restore power to the Pro-Cut.
INSTALLATION
ALWAYS USE GENUINE LINCOLN
ELECTRIC
VORTECH™ NOZZLES
• Only Genuine Lincoln Electric consumables yield the
best cutting performance for the PRO-CUT 55 and
PRO-CUT 80.
•
The patented VORTECH™ nozzle provides an extra
"kick" of swirl as the arc exits the nozzle which
improves cutting performance. No other nozzle has
this capability or can match its performance.
PLASMA TORCH
ELECTRODES
A-3
AND
Advertisement
