Summary of Contents for Lincoln Electric Pro-Torch PTA-9F
Page 1
IM682 April, 2004 AIR-COOLED TIG TORCHES PTA-9 PTA-17 PTA-26 PTA-9F PTA-17V PTA-26V PTA-17F PTA-26F Safety Depends on You Lincoln arc welding and cutting equipment is designed and built with safety in mind. However, your overall safety can be increased by proper installation ...
Miami, Florida 33135 or CSA Standard W117.2-1974. A Free copy of “Arc Welding Safety” booklet E205 is available from the Lincoln Electric Company, 22801 St. Clair Avenue, Cleveland, Ohio 44117-1199. BE SURE THAT ALL INSTALLATION, OPERATION, MAINTENANCE AND REPAIR PROCEDURES ARE PERFORMED ONLY BY QUALIFIED INDIVIDUALS.
SAFETY ARC RAYS can burn. ELECTRIC SHOCK can kill. 3.a. The electrode and work (or ground) circuits 4.a. Use a shield with the proper filter and cover are electrically “hot” when the welder is on. plates to protect your eyes from sparks and Do not touch these “hot”...
Page 4
SAFETY WELDING SPARKS can CYLINDER may explode cause fire or explosion. if damaged. 6.a. Remove fire hazards from the welding area. 7.a. Use only compressed cylinders If this is not possible, cover them to prevent containing the correct shielding gas for the the welding sparks from starting a fire.
Page 5
SAFETY soudage. Utiliser des lunettes avec écrans lateraux dans les PRÉCAUTIONS DE SÛRETÉ zones où l’on pique le laitier. Pour votre propre protection lire et observer toutes les instructions 6. Eloigner les matériaux inflammables ou les recouvrir afin de et les précautions de sûreté specifiques qui parraissent dans ce prévenir tout risque d’incendie dû...
PTA-9 PTA-9F MODELS AIR-COOLED 125 AMPS by Lincoln Electric TORCH/REPLACEMENT PARTS Part Industry Item Description Reference S19258-1 ––– Torch body with gaskets, PTA-9 S24922 ––– Flex torch body (S24924 / S24927) S19511-1 ––– Torch handle, PTA-9 S19512-2 57Y01-2 Power cable and gas, 12-1/2’ (3.8m)
Page 7
PTA-17 PTA-17V PTA-17F MODELS AIR-COOLED 150 AMPS by Lincoln Electric TORCH/REPLACEMENT PARTS Part Industry Item Description Reference S19259-1 ––– Torch body with gaskets, PTA-17 S24923-1 ––– Flex body w/gaskets, S24924/S24928 S19259-2 ––– Torch body with gaskets, PTA-17V S19515-1 VS-2 Valve knob with “O” ring, 10 pack S19511-1 –––...
Page 8
CHART 4 – Select tungsten diameter and alumina nozzle based on current and application. TYPICAL CURRENT RANGES FOR TUNGSTEN ELECTRODES DCEN (-) DCEP (+) Balanced Wave Unbalanced Wave Tungsten Pure and Pure and 1%, 2% 1%, 2% Alumina Electrode 1%, 2% 1%, 2% Pure Thoriated...
Page 9
PTA-26 PTA-26V PTA-26F MODELS AIR-COOLED 200 AMPS by Lincoln Electric TORCH/REPLACEMENT PARTS Part Industry Item Description Reference S19260-1 ––– Torch body with gaskets, PTA-26 S24925-1 ––– Flex body w/gaskets (S24926/S24929) S19260-2 ––– Torch body with gaskets, PTA-26V S19515-2 VS-1 Valve knob with “O” ring S19511-2 –––...
Page 10
CHART 7 – Select tungsten diameter and alumina nozzle based on current and application. TYPICAL CURRENT RANGES FOR TUNGSTEN ELECTRODES DCEN (-) DCEP (+) Balanced Wave Unbalanced Wave Tungsten Pure and Pure and 1%, 2% 1%, 2% Alumina Electrode 1%, 2% 1%, 2% Pure Thoriated...
Page 11
CHART 1 – Select tungsten diameter and alumina nozzle based on current and application. TYPICAL CURRENT RANGES FOR TUNGSTEN ELECTRODES DCEN (-) DCEP (+) Balanced Wave Unbalanced Wave Tungsten Pure and Pure and 1%, 2% 1%, 2% Alumina Electrode 1%, 2% 1%, 2% Pure Thoriated...
CONNECTION DIAGRAMS POWER SOURCE GAS SOLENOID, 1 PIECE POWER CABLE TORCH GAS VALVE, 1 PIECE POWER CABLE TORCH GAS VALVE, 2 PIECE POWER CABLE Note: Refer to the manufacturer’s power source operating manual for recommended installation practice.
Page 13
CONNECTION DIAGRAMS (continued) HOOK-UP KITS – The hook-up kits contain the necessary hoses to connect between your gas regulator and power source. The hook-up kits are required for proper con- nection and are ordered separately. KP505 For PTA-9F, PTA-17F, PTA-26F Part No.
Page 14
Do not touch electrically live parts or Keep flammable materials away. Wear eye, ear and body protection. WARNING electrode with skin or wet clothing. Insulate yourself from work and ground. Spanish No toque las partes o los electrodos Mantenga el material combustible Protéjase los ojos, los oídos y el AVISO DE bajo carga con la piel o ropa moja-...
Page 15
Keep your head out of fumes. Turn power off before servicing. Do not operate with panel open or Use ventilation or exhaust to guards off. WARNING remove fumes from breathing zone. Spanish Los humos fuera de la zona de res- Desconectar el cable de ali- No operar con panel abierto o AVISO DE...
Page 16
• World's Leader in Welding and Cutting Products • • Sales and Service through Subsidiaries and Distributors Worldwide • Cleveland, Ohio 44117-1199 U.S.A. TEL: 216.481.8100 FAX: 216.486.1751 WEB SITE: www.lincolnelectric.com...
Need help?
Do you have a question about the Pro-Torch PTA-9F and is the answer not in the manual?
Questions and answers