Related Manuals for Kilotech KLE Series
Summary of Contents for Kilotech KLE Series
- Page 1 Operation Manual Contents subject to change without notice Version 01.03 11/2016...
- Page 2 TABLE OF CONTENTS TABLE OF CONTENTS ........................2 Introduction ..........................3 General Precautions ........................4 Unpacking ..........................5 Installation ..........................5 Power ................................. 5 Operation ..........................6 Turning the scale On and Off ........................6 Checking Calibration ..........................6 Weighing ..............................6 Tare................................
- Page 3 Introduction Thank you for choosing a Kilotech product. We appreciate your business and hope that you will enjoy using your scale. Should you require support, please contact your local dealer from whom you have purchased.
- Page 4 Might damage load cell for a prolonged period of time. Do not tamper with the scale yourself This will void the warranty. Contact your local distributor or Kilotech directly to properly repair your scale Do not overload beyond the maximum...
- Page 5 Unpacking All KLE 200 scales are supplied with: • AC power adapter • instruction manual Installation Power The scale can be operated using 4 AA alkaline (not included), or the AC adapter supplied. Battery Installation 1. Turn the balance over. 2.
- Page 6 Operation Turning the scale On and Off With no load on the platform, press ON/TARE key. The scale will do a display segment check and then display the software version. NOTE: Allow at least 5 minutes for the balance to temperature stabilize before using. If the balance is moved to a different temperature environment, allow additional time to stabilize.
- Page 7 Parts Counting NOTE: Parts counting must be enabled in the Setup menu before using The balance will count parts based on the weight of a reference sample, 5, 10, 20, 30, 40 or 50 parts. For optimum results, the parts should be uniform in weight. 1.
- Page 8 Care and maintenance To keep the balance operating properly, the housing and platform should be kept clean and free from foreign material. If necessary, a cloth dampened with a mild detergent may be used. Keep calibration masses in a safe dry place.
Need help?
Do you have a question about the KLE Series and is the answer not in the manual?
Questions and answers