Declaration Of Conformity - Braster Pro User Manual

www.braster.eu). Any actions connected with repairs or
replacements may only be performed by the personnel of an
authorized service point. The manufacturer is not liable for any
damages caused by non-compliance with the User Manual.
Warranty
The Braster device is covered by the manufacturer's warranty for
24 months. The warranty shall only be valid if accessories and spare
parts approved by BRASTER S.A. are used and the device is used
as described in the User Manual and according to the intended use.
Any repairs of the Braster device must be made by the
manufacturer's servicing team. Any repairs performed by
unauthorized persons will result in voiding of the warranty.
14.

DECLARATION OF CONFORMITY

BRASTER S.A. hereby declares that the Braster Pro conforms with
the essential requirements and other relevant provisions of the
Directive 93/42/EEC and the Directive 2011/65/EU. If you would
like to receive the declaration of conformity, contact the
manufacturer (contact details are given on the last page of this
User Manual).
ELECTROMAGNETIC COMPATIBILITY
The Braster device is intended for use in an electromagnetic
environment with controlled radio frequency interference. The
customer or the user of the image acquisition device may help
prevent electromagnetic interference by maintaining the minimum
required distance between the mobile device and cellular radio
devices (transmitters). This equipment is not subject to the
protection from harmful interference and may not cause
interference with duly authorized systems.
40