Table of Contents
Advertisement
To charge the battery, pull the rubber cap with the USB sign
situated on the side of the Braster device next to the ON/OFF
buton. Connect one end of the USB cable to the Braster device and
the other end to the charger (the plug is not included in the set).
Connect the charger to a power source (see Fig. 11).
When the device is connected to the charger, the device power
status indicator will be lit as steady orange. The indicator switches
itself off when the battery is fully charged. Full charging takes
approximately three hours. The device must be disconnected from
the power source via the USB cable, which must be safely
disconnected from the mains supply when the charging is complete.
Fig. 11: Location of the USB slot
10.
SAFE OPERATION
Follow the recommendations below to ensure the safe operation of
the Braster device:
• Before you use the device for the first time, charge the battery
using the USB cable provided.
• Only use accessories and materials supplied or recommended
by the manufacturer.
• Never let the Braster device or the matrices come into contact
with water.
USB slot
Mini-USB
slot
37
Advertisement
Table of Contents
