Disinfection - Braster Pro User Manual

• After the examination store the device with a matrix on. Place
the device with the matrix facing downwards, making sure
that dust does not get into the device. Keep the device in the
original box.
• Do not place any items into the image acquisition device, this
may cause damage to the internal framework of the device.
For any damage caused by the user, the manufacturer will not
be held responsible.
• Do not allow the foil on the matrix to come into contact with
any sharp objects.
• During the examination, do not place any objects between the
image acquisition device and the mobile device. If objects are
placed between, the connection between the image
acquisition device and the mobile device may be lost.
• The device can only be repaired by the manufacturer's
servicing team. Any other attempt to repair the device will
void the warranty.
• Keep the device away from children.
11.

DISINFECTION

Before each examination disinfect the inner and outer surfaces of
all of the three matrices. Disinfection consists of spraying Softasept
or disinfectants based on isopropyl alcohol over entire matrix, on
both sides, and cleaning it thoroughly with a disposable cotton
gauze or tissue. By disinfecting you make sure that the surface is
free of pathogenic microorganisms such as bacteria, viruses and
fungi.
The device must not be washed or immersed in water. Do
not clean the applied parts of the matrices, which come into
contact with the breast skin, with any mechanical agents that
may cause damage to such surfaces (e.g. brushes) and do
not use agents that contain organic solvents (e.g. gasoline,
acetone) as, once damaged, matrices will not be fit for
further use.
38