Table of Contents
Advertisement
1.
Ask the Administrator of the clinic to create an
account for you at HCP Portal.
2.
Go to your email account and find an email from
BRASTER S.A. confirming registration with a link to
change the password. If you can't find it, check the
"Spam" folder.
3.
After changing the password, log in as a user at
hcpportal@braster.eu
conditions.
f.
Download the Braster Care app from the App Store, if
your mobile device has the iOS operating system (i.e. is
an iPhone or an iPad), or from Google Play, if your mobile
device has the Android operating system.
g.
Install the Braster Care app on your mobile device.
h.
Make sure that charging of the device is complete, start
the Braster Care app and follow the instructions described
in chapter 7.
6.2. PREPARATION OF THE BRASTER DEVICE
BEFORE SUBSEQUENT EXAMINATIONS
a.
When preparing for an examination, first disinfect and
clean the surface of the liquid crystal matrices. You should
pay particular attention to the surface on the inner side of
each matrix. It is important to use the recommended
cleaning and disinfection agents and thoroughly clean the
surface of the foil so as to not leave any fingerprints,
smudges, dust etc. as it can alter the interpretation of the
thermographic examination (for more information see
chapter 11 titled "Disinfection" and chapter 12 titled
"Cleaning and Maintenance").
b.
When the matrices have been cleaned, start the mobile app
and follow the instructions provided in chapter 7.
and
accept
22
terms
and
Advertisement
Table of Contents
