Nikon Coolpix 5600 Repair Manual page 88

Item
Monitor
Shooting image
Lens capacity
Focal length
Open aperture F No.
Peripheral light reduc-
tion
Ghost/Flare
Point light source
Surface light source
Distortion
Dust in a picture
・ Inclined degree of image shall be 0.5 degree or less.
・ PC monitor and print output
(Output will be evaluated while the display range boundary of LCD
unit is regarded as standard when the through-the-monitor image is
made.)
Wide-end position (Compelling ∞ )
5.7 mm + 7.1%
- 1.1%
Tele-end position (Compelling ∞ )
17.1 mm + 0.9%
- 6.9%
Wide-end position (Compelling ∞ )
F2.9 + 5.8%
- 2.3%
Tele-end position (Compelling ∞ )
F4.9 + 10.6%
+ 2.1%
・ Against the picture center, the luminance of the nearest peripheral
area must be 35% or more.
・ Against the picture center, the luminance at 70% of the image
height must be 55% or more.
・ There must not be an outstanding ghost/flare.
・ There must not be an outstanding flare at the center.
・ There must not be an outstanding deformation.
・ There must not be an outstanding dust in a picture.
・When the picture center (within the circle whose diameter is 80%
of the short side) is Zone I and its outside is Zone II, the light
reduction against the periphery must be as follows :
a
Zone I 4 or less
Zone II 10 or less
a : 1.5% or less
b : More than 1.5% and less than 3.0%
- R2･ E5600 -
Criteria
b
0
2 or less
VAA31001-R.3651.A
Applied tool(s)
Photoshop
Printer
Focal length
measuring instrument
Lens drive tool
Visual observation
Photoshop
CRT monitor
PC