Nikon Coolpix 5600 Repair Manual page 29

2ND LENS GROUP UNIT
・ Set the lever of the key barrel unit [#428] at the front side. Set the notch of the 2nd lens group unit [#426] at the left
side. Fit the convex sections to the grooves and set the 2nd lens group unit [#426] into the key barrel unit [#428].
2nd lens group unit [#426]
Convex section
key barrel unit [#428].
ASSEMBLY OF FIXED BARREL
・ Set the light-shield ring [#424].
・ Make the stepped difference side of the finder gear A [#416] face the CCD. Then, set the finder gear A [#416] and
insert the gear shaft B [#418].
・ Set the zoom gear F [#412] and insert the gear shaft A [#413].
・ Apply the adhesive (EC-1368) to the gear shafts.
EC-1368
Light-shield ring [#424]
Notch
Groove
Lever
Zoom gear F [#412]
Gear shaft A [#413]
- A3･ E5600 -
Convex section
Groove
Gear shaft B [#418]
Finder gear A [#416]
VAA31001-R.3651.A
EC-1368