Contents - Toshiba TLP-261 Owner's Manual

Floor-mounted projector placement (continued)
1
Place the projector on a steady, level surface such as a table.
To obtain proper screen projection, place the projector so that the light beam hits the screen squarely.
Top view
Screen
90°
Point the lens straight at the center of the screen as above.
2
Determine the screen size projected on the screen.
The projection size depends on the distance between the lens and the screen.
Adjust the projection size by changing the distances as shown below.
Screen
90°
a
Note
You can adjust the vertical projection position with the lens shift dial.
Place the projector horizontally so that the projecting light hits the
screen squarely.
Projection size x 20.32 - 31
a (min.) =
1000
Projection size x 24.38 - 32
a (max.) =
1000
a: Distance between the lens and the screen (m)
Limit: 0.70m < a < 3.63m
20
Side view
Screen
90°
• The values are approximations.
Projection size Minimum
(inches)
(At maximum zoom)
30 –
36 0.70
50 0.98
80 1.59
100 2.00
120 2.41
150 3.02
180 3.63
18

CONTENTS

a (m)
Maximum
(At minimum zoom)
0.70
0.85
1.19
1.92
2.41
2.89
3.63
–
Continued