Projector Placement Angle Adjustment (Foot Adjuster); Foot Adjuster; Foot Adjuster Release Button; Contents - Toshiba TLP251 Owner's Manual

3lcd data projector with document imaging camera
Hide thumbs Also See for TLP251:
Table of Contents

Advertisement

Projector placement angle adjustment (Foot adjuster)

The tilt of the projector can be adjusted using the foot adjuster. Adjust this when the highest position by the lens shift dial
insufficient. Refer to "Projection on the screen"
1

Foot adjuster

Foot adjuster
release button
2
Lift up
Lower
Notes
• To put the foot adjuster back, hold down the foot adjuster release button and lower the front slowly.
• Be sure to hold the projector when putting the foot adjuster back so as not to let the front fall on your fingers.
• Do not tilt the projector at an angle exceeding the range adjustable by the foot adjusters, since the life duration of the lamp may be shortened.
27
, and adjust the foot adjuster after projecting a picture.
Lift the front of the projector until the desired tilt
angle is obtained and hold down the foot adjuster
release button.
The foot adjuster will extend.
Release the button to lock in position.
Turn the foot adjuster to make fine adjustment to
the height.
Turn clockwise to lift up.
Turn counterclockwise to lower.
21

CONTENTS

20
is

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Tlp250Tlp550Tlp551

Table of Contents