Using The Menus; How To Use The Menus - Toshiba TDP-MT200 Owner's Manual

Using the menus

You can call up on-screen menus, and conduct a number of adjustments and settings using
the operation buttons

How to use the menus

The menu shown below is for operation instructions purposes and might differ from the
actual display.
2. Select a Category
Select a category by using
There are following four
categories:
Image adjustment menu
Display setting menu
Default setting menu
Status display menu
3. Adjustments & Settings
Item
Adjustment/Setting Value
These marks signify the
items can be adjusted/set
by using
These marks signify the items can
be selected from the list by using
.
After an item is selected, apply it
by pressing .
The figure shows displays given for operation instructions purposes. As the display
may differ depending on the item, use the following pages as a reference.
Note
• Menu adjustments and settings are saved when the power is turned off via the ON/
STANDBY button. If the power cable is disconnected before this, or the power goes out,
then the data will not be saved.
p.16 on the control panel (main unit side) and remote control.
1. Press the MENU button
.
p.29
p.30
p.31
p.32
Press
.
4. Back
Return button
Display the Setting display menu
Displays the current
adjustments and settings of
selected category.
Item shown with gray cannot
be adjusted with the current
input source.
to open the menu.
This mark signfy that
there are options.
Press to display a
list of options.
28
5. End
Press the MENU
button
The menu disappears.