Using Handy Features; Using Auto Setting - Toshiba TDP-MT200 Owner's Manual

English Français

Using handy features

Using auto setting

This function sets up the projector to the optimum state for
each type of the input signal by using simple operations.
1
Press the SET UP button.
The Set up menu appears.
2
Press the SET UP button again.
The displayed menu item is automatically adjusted/set.
For computer input, the
processing.
For manual adjustment and setting, see the following table
Notes
• The image may not be projected or auto adjustment/setting may not be performed
correctly for input signals other than those supported by the projector
.
p.41
• Keystone adjustment cannot be corrected automatically.
Correcting the keystone distortion
When the foot adjuster
projecting the image, the picture will undergo keystone (trapezoidal) distortion.
This projector is capable of correcting this keystone distortion.
Manual adjustment
Press the SET UP button to display the Set up menu and select [Keystone]. Use
the buttons for keystone adjustment. When the adjustment is finished, press
the RETURN button. The menu disappears.
Notes
• Depending on the amount of keystone adjustment and the content of images, some
information may be lost, or the picture quality may suffer.
• Keystone adjustment is available for the keystone distortion in a slant angle of ±15
degrees.
• Keystone adjustment will not change the shape of the menus, the start-up screen,
and the background (with no signal input).
Español Deutsch
icon will appear during
is used to change the projector placement angle while
p.24
Before correction After correction
25
Italiano Português Svenska
Control panel
p.26 .
Remote
Control
, ,
p.39 p.40