Setup/Installation Menu Layout; Navigating The Menu System - Toshiba TheaterWide 46HM95 Owner's Manual

Setup / Installation menu layout
To open the Installation menu (illustrated below), press MENU on the remote control or TV front panel, open the Setup menu,
select Installation, and press ENTER.
From Main Menu/Setup
menu, select "Installation"
sub-menu
➔

Navigating the menu system

You can use the buttons on the remote
control or TV front touchpad to access and
navigate your TV's on-screen menu system.
• Press MENU to open the menu
system.
• Use the up/down/left/right arrow
buttons (yzx •) on the remote
control or TV front panel to move in
the corresponding direction in a menu.
• Press ENTER to save your menu
settings or select a highlighted item. (A
highlighted menu item appears in a
different color in the menu.)
• All menus close automatically if you do not make a selection within 60 seconds, except the
signal meter menu which closes automatically after 5 minutes.
• To close a menu instantly, press EXIT.
36
HM95_R1_035-36_061505 36
Chapter 4: Menu layout and navigation
(continued)
➞ Input Configuration ➞ [ Input Configuration Window ]
➞ Channel Program ➞ ANT1
Terrestrial
➞ Channel Add/Delete ➞ [ Channel Add / Delete Window ]
➞ Signal Meter ➞ [ Signal Meter Window ]
➞ IEEE1394 Devices ➞ [ IEEE1394 Device Management Window ]
Devices
➞ TheaterNet Devices ➞ [ TheaterNet Setup Window ]
Setup ➞ Start ➞ [ Launches TV Guide On Screen
TV Guide On Screen ®
Time and Date ➞ Start Setup ➞ [ Time And Date Setup Window ]
System Status ➞ System Information ➞ [ System Information Window ]
TV front touchpad
EXIT x • z
*The MENU button on the TV front touchpad functions
as the ENTER button when a menu is on-screen.
Copyright © 2005 TOSHIBA CORPORATION. All rights reserved.
}
➞ [ Scan for new channels on desired Antenna ]
➞ ANT2
Remote control
y MENU
(ENTER*)
6/24/05, 9:35 PM
® system setup]
MENU
ENTER
y
x •
z
EXIT