Chapter 8: Using The Tv's Features; Selecting The Video Input Source To View - Toshiba TheaterWide 46HM95 Owner's Manual

8
Using the TV's features

Selecting the video input source to view

To select the video input source to view:
1. Press INPUT on the remote control or TV/VIDEO on the
TV front panel.
2. Press 0–8 to select the input source you want to view, which
will depend on the input terminals you used to connect
your devices (see Chapter 2).
The current signal source displays in the top right corner of
the Input Selection screen.
Input Selection
0
ANT 1 ANT 1
1 Video 1
2 Video 2
3 Video 3
4 ColorStream HD1
5 ColorStream HD2
6 HDMI 1
7 HDMI 2
8 ANT 2
0 8
- / INPUT to Select
Note:
• When the Input Selection screen is open, you also can use the yz
buttons on the remote control (or the Channel yz buttons on the
front panel) to change the input, or you can repeatedly press
INPUT on the remote control or TV/VIDEO on the TV front panel
to change the input.
• To select an IEEE1394 input source, press the TheaterNet DEVICE
button on the remote control (see page 26 and 45).
• If an IEEE1394 device is the current input, it will appear at the
bottom of the Input Selection list; however, it will not display in the
list if you change the input source.
• You can label the video input sources according to the specific
devices you have connected to the TV (see "Labeling the video
input sources" on the next page).
• The source can be "hidden. " See page 68 for details.
HM95_R2_067-78_061505 67
ANT 1
Copyright © 2005 TOSHIBA CORPORATION. All rights reserved.
Remote control
TV/VIDEO
CHANNEL
TV front touchpad
*The MENU
button
functions as
the ENTER
button when
a menu is
on-screen.
6/27/05, 4:32 PM
Numbers
INPUT
y
z
zy
(ENTER)*
67