Setup/Installation Menu Layout; Navigating The Menu System - Toshiba TheaterWide 62HM15 Owner's Manual

Setup / Installation menu layout
To open the INSTALLATION menu (illustrated below): press MENU on the remote control or TV front panel, open the SETUP
menu, select INSTALLATION, and press ENTER.
MENU / Setup / Installation

Navigating the menu system

You can use the buttons on the remote
control or TV front touchpad to access and
navigate your TV's on-screen menu system.
• Press MENU to open the menu
system.
• Use the up/down/left/right arrow
buttons (yzx •) on the remote
control or TV front panel to move in
the corresponding direction in a menu.
• Press ENTER to save your menu
settings or select a highlighted item.
(A highlighted menu item appears in a
different color in the menu.)
• All menus close automatically if you do not make a selection within 60 seconds except the
signal meter menu which closes automatically after 5 minutes.
• To close a menu instantly, press EXIT.
#01E034-035_62HM15 35
Black
62HM15
Chapter 4: Menu layout and navigation
(continued)
Input Configuration
Terrestrial Channel Program
Channel Add/Delete
Signal Meter
IEEE1394 Devices
Devices
TheaterNet™ Devices
®
TV Guide On Screen Setup Start
Time and Date Start Setup [ Time and Date Setup window ]
System Status System Information
TV front touchpad
TV/VIDEO EXIT CHANNEL VOLUME
EXIT x • z y
*The MENU button on the TV front touchpad functions
as the ENTER button when a menu is on-screen.
Copyright © 2005 TOSHIBA CORPORATION. All rights reserved.
[ Input Configuration window ]
}
ANT1
[ Scan for new channels on selected antenna ]
ANT2
[ Terrestrial Channel Add/Delete window ]
[ Signal Meter window ]
[ IEEE1394 Device Management window ]
[ TheaterNet Device Setup window ]
®
[ Start TV Guide On Screen setup ]
[ System Information window ]
Remote control
MENU POWER
MENU
(ENTER*)
+10
–
100
ACTION
MENU
ENTER
5/24/05, 6:18 PM
MENU
ENTER
y
x •
z
EXIT
35