oticon TV Adapter 2.0 Instructions For Use Manual
  1. Manuals
  2. Brands
  3. oticon Manuals
  4. Adapter
  5. ConnectLine Phone Adapter 2.0
  6. Instructions for use manual

oticon TV Adapter 2.0 Instructions For Use Manual

Hide thumbs Also See for TV Adapter 2.0:
Table of Contents

Advertisement

Quick Links

Instructions for use
TV Adapter 2.0

Advertisement

Table of Contents
loading

Related Manuals for oticon TV Adapter 2.0

Summary of Contents for oticon TV Adapter 2.0

  • Page 1 Instructions for use TV Adapter 2.0...
  • Page 2 Streamer Pro. This will help you get the most out of your new TV Adapter. TV Adapter 2.0 enables the hearing aid user to listen to the TV, by wirelessly sending the TV sound from TV Adapter through Streamer Pro directly to the hearing aid.

  • Page 3: Table Of Contents

    Table of content Handling About Volume control Package content Start TV listening TV Adapter overview SelectMe, using more than one TV Adapter Start-up Caring for TV Adapter Installation Warnings Place your TV Adapter Warnings Connect to a power outlet More info Connect to the TV Conditions of Use Connect using TOSLINK...

  • Page 4: Package Content

    Box 1 Box 2 The packaging box consists of the following elements: Power supply RCA cable Mini jack Adapter Instructions for use TV Adapter 2.0 Box 3 TV Adapter 2.0 This booklet (Instructions for use) TOSLINK About Start-up Handling Warnings More info...

  • Page 5: Tv Adapter Overview

    Fault condition ** No light Blinking Steady SelectMe TOSLINK out Power supply RCA left and right TOSLINK in * Try other input connection ** Contact your hearing care professional For more information please refer to: www.oticon.global/connectline About Start-up Handling Warnings More info...

  • Page 6: Installation

    Installation Using TV Adapter for the first time Before you can use your Streamer Pro and hearing aids with your TV, your TV Adapter must be connected to a power outlet, connected to the TV and paired with your Streamer Pro. This is a step-by-step guide on how to install TV Adapter.

  • Page 7: Place Your Tv Adapter

    Place your TV Adapter There are two options of placing TV Adapter: 1. Close to the TV - placed horizontally (A). 2. Behind or close to the TV hanging on the wall (vertically) (screws not included) (B). About Start-up Handling Warnings More info...

  • Page 8: Connect To A Power Outlet

    Connect to a power outlet Use the power supply from box no. 1. Box 1 1. Plug the power cord into the “power” connector on TV Adapter (A). 2. Plug the power supply into the mains wall socket (B) and turn on the switch.

  • Page 9: Connect To The Tv

    SCART (p. 24) SCART audio output (L+R) * Dolby and the double-D symbol are registered trademarks of Dolby Laboratories. Please refer to the detailed specification of ConnectLine TV Adapter 2.0 (www.oticon.global/connectline) and your TV manual/specifications to ensure compatibility. Please see the following pages for a solution which fits your TV.

  • Page 10: Connect Using Toslink

    It may be necessary to configure your TV, DVD player, or home theatre system so that the correct audio output is available on the TOSLINK output. For more advanced or complex installations please refer to the support section on www.oticon.global/connectline About Start-up...

  • Page 11: Connect Using Rca

    It may be necessary to configure your TV so that the correct audio output is available on the RCA output. For more advanced or complex installations please refer to the support section on www.oticon.global/connectline About Start-up Handling Warnings More info...

  • Page 12: Connect Using Mini Jack Adapter

    Note The TV speakers may be muted when connecting to the headphone output, and sound only heard through Streamer Pro/TV Adapter. For more advanced or complex installations please refer to the support section on www.oticon.global/connectline TV cord About Start-up Handling Warnings More info...

  • Page 13: Connect Using Scart

    SCART output (i.e. sound from a connected DVD player). For more advanced or complex installations please refer to the support section on www.oticon.global/connectline The SCART Adapter is an accessory which is not included in the package content. If you need a SCART Adapter, please contact your hearing care professional.

  • Page 14: Pair Streamer Pro With Tv Adapter

    Pair Streamer Pro with TV Adapter Before using your Streamer Pro for TV listening, it must be paired with your TV Adapter. For pairing: 1. Make sure TV Adapter is powered on, i.e. the power indicator is steady green. 2. Press and hold the ON/OFF button on Streamer Pro (B) for 5-6 seconds until the blue light starts blinking (A).
  • Page 15 Pairing Streamer Pro Streamer Pro Description top status front Adapter Streamer Pro and TV Adapter ON Streamer Pro in pairing mode Pairing complete Streaming - no audio input detected RCA inserted and streaming TOSLINK inserted and streaming (digital) Steady Blinking About Start-up Handling Warnings More info...

  • Page 16: Volume Control

    Volume control Use the volume button on Streamer Pro to adjust the TV volume level in both hearing aids. Adjust the volume by pressing up or down briefly. Repeat the brief press for further adjustments. Mute While watching TV it is possible to switch the microphones off in your Volume up hearing aids, so that only the sound from the TV is heard.

  • Page 17: Start Tv Listening

    Start TV listening Pairing Make sure to wear Streamer Pro around your neck using the Streamer Pro Streamer Pro Description top status front Adapter neck loop, and make sure Streamer Pro is powered on. Streamer Pro and TV Adapter ON Turn on the TV sound Streaming - no audio input detected Briefly press the TV button on the front of Streamer Pro.

  • Page 18: Selectme, Using More Than One Tv Adapter

    SelectMe, using more than one TV Adapter With Streamer Pro 1.1 and later you can use multiple TV Adapters. E.g. one in the living room and one in the bedroom. To switch between TV Adapters: 1. Make sure you are not connected to any TV Adapter, i.e. Streamer Pro should be turned on, but not active.

  • Page 19: Caring For Tv Adapter

    Caring for TV Adapter Use a soft, dry cloth to clean TV Adapter. IMPORTANT NOTICE TV Adapter must never be washed or immersed in water or other liquids. About Start-up Handling Warnings More info...

  • Page 20: Warnings

    Warnings For your personal safety and to ensure Interference Incompatible non-supplied accessories correct usage, you should familiarise yourself TV Adapter has been thoroughly tested Only use accessories, transducers or cables fully with the following general warnings for interference according to the most supplied by the manufacturer.

  • Page 21: Conditions Of Use

    BS-F200 Humidity: 15% to 93% relative humidity, non-condensing TV Adapter 2.0 contains a radio transceiver using Bluetooth at 2.4 GHz. The radio Atmospheric pressure: 700 hPa to 1060 hPa transmitter is weak and always below 10mW equal to 10 dBm in total radiated power.
  • Page 22 USA and Canada Notice: Changes or modifications This Class B digital apparatus complies with If this equipment does cause harmful This device contains a radio module with not expressly approved by the party Canadian ICES-003. interference to radio or television the following certification ID numbers: responsible for compliance could void the reception, which can be determined...
  • Page 23 International warranty Your device is covered by an international The above warranty does not affect any The manufacturer declares that this TV Oticon A/S Adapter 2.0 (BS-F200) is in compliance Kongebakken 9 limited warranty issued by the legal rights that you might have under...
  • Page 24 Singapore IMDA label Description of symbols used in this booklet Indicates that the device complies with the standards and specification published by Info- Warnings Communications Media Development Authority (IMDA) and is compatible with the public Text marked with a warning symbol must be read before using the device. telecommunication networks in Singapore and does not cause radio frequency interference to other authorized radio-communication networks.
  • Page 25 Description of additional symbols used on labels South Africa ICASA label Indicates that the device has license to be sold in South Africa. Japan TELEC symbol Indicates mark for certified radio equipment. Brazil ANATEL label Indicates that the device is certified and homologated in Brazil. Korea Certification Mark (KC) The device complies with Korean product safety requirements for electrical and electronic equipment.
  • Page 26 0000191481000001...

Table of Contents