Installation Procedure; Connecting The Power Cord And Cables; Holder Stand Installation - TEC B-870 SERIES Owner's Manual

6. INSTALLATION PROCEDURE

6. INSTALLATION PROCEDURE

6.1 CONNECTING THE POWER CORD AND CABLES

Turn the POWER SWITCH to OFF before connecting the power cord or cables.
Expansion I/O Cable
Power Cord
Serial I/F Cable (RS-232C)
NOTES: 1. Option B-4800-PC-QM must be installed for use of the high speed PC interface cable.
2. Different cables cannot be used at the same time.

6.2 HOLDER STAND INSTALLATION

Fit the left and right side holders into the dowels of the holder base and fasten the side holders to the
holder base with the thumbscrews.
Left Side Holder
Holder Base
Parallel I/F Cable
(Centronics)
Dowel
6.1 CONNECTING THE POWER CORD AND CABLES
WARNING!
Thumbscrew
6-1
EM1-33039E
Fig. 6-1
Right Side Holder
Fig. 6-2