How To Configure Humidifier On Modulating And 2-Stage Furnaces; How To Configure Heat Kit - Daikin One+ Reference Manual

Full set-up
How to Configure Humidifier on Modulating and
2-stage Furnaces
Refer to the Humidifier in the furnace section under Installing Daikin
»
One+ section for details on wiring humidifier to the furnace board
For 2-Stage furnace, Daikin One+ supports 'humidifier relay'
»
settings. It has the following options:
ON: Humidifier is turned on with heat demand
–
& humidification demand
OFF: Humidifier remains off (relay never closes).
–
For Modulating furnace, humidifier is turned ON with heat demand
»
& humidification demand.

How to Configure Heat Kit

Heater kit configuration varies based on the type of the Indoor units.
DVPVC, DVPTC, MBVC
Use dip switches on the board
»
to configure the heater kit size.
Please refer to the installation
manual of these boards to locate
the dip switches.
Heater kit size configured with
»
dip switches will appear under
Installer Wizard > equipment setup
> air handler > heater kit > size (kW)
Enable 'heater kit installed' checkbox.
Installer Wizard > equipment setup
> air handler > heater kit installed
'heater kit' sub-menu
»
appears on enabling 'heater
kit installed' checkbox
Inside 'heater kit' sub-menu 'heat
»
airflow trim' value can be adjusted
35