Conf Menu - Presys T-1200PIR Technical Manual

PRESYS
 Instruments

2.2 - CONF Menu

CF: Selects the temperature unit between ºC and ºF. The ITS-90 or IPTS-68
temperature scales are selected for both the thermo-element and for the black body temperature scales are selected for both the thermo-element and for the black body temperature scales are selected for both the thermo-element and for the black body
cavity temperature reading/control.
LCD: This option sets the vacuum fluorescent display contrast. Use the keys : This option sets the vacuum fluorescent display contrast. Use the keys : This option sets the vacuum fluorescent display contrast. Use the keys

and until you get a better contrast and finish the operation by pressing the key until you get a better contrast and finish the operation by pressing the key until you get a better contrast and finish the operation by pressing the key
ENTER.
BT: Shows the battery or the battery charger voltage value if the black body : Shows the battery or the battery charger voltage value if the black body : Shows the battery or the battery charger voltage value if the black body
cavity is turned off or on, respectively. cavity is turned off or on, respectively. cavity is turned off or on, respectively.
Battery level
4.0 to 7.0 V
< 4.0 V
DT: Updates the date and time of the calibrator. Thus, when the calibrator : Updates the date and time of the calibrator. Thus, when the calibrator : Updates the date and time of the calibrator. Thus, when the calibrator
performs a calibration in the automatic mode via ISOPLAN, all data are registered performs a calibration in the automatic mode via ISOPLAN, all data are registered performs a calibration in the automatic mode via ISOPLAN, all data are registered
together with date and time of occurrence. Every time the calibrator is powered off, the together with date and time of occurrence. Every time the calibrator is powered off, the together with date and time of occurrence. Every time the calibrator is powered off, the
internal clock does not continue to be updated. However, the ISOPLAN software can internal clock does not continue to be updated. However, the ISOPLAN software can internal clock does not continue to be updated. However, the ISOPLAN software can
automatically update the calibrator date and time with the computer internal clock. automatically update the calibrator date and time with the computer internal clock. automatically update the calibrator date and time with the computer internal clock.
Otherwise, use keys Otherwise, use keys Otherwise, use keys
go to another field. The key ENTER confirms the last selection. go to another field. The key ENTER go to another field. The key
BZ: Menu that configures the piezoelectric buzzer. BZ: BZ: Menu that configures the piezoelectric buzzer. Menu that configures the piezoelectric buzzer.
NO: NO: Disables the buzzer. NO: Disables the buzzer. Disables the buzzer.
YES: The buzzer beeps when the cavity reaches the set point and stabilizes. YES: YES: The buzzer beeps when the cavity reaches the set point and stabilizes. The buzzer beeps when the cavity reaches the set point and stabilizes.
ENDCAL: The buzzer beeps only at the end of a calibration in the automatic ENDCAL: ENDCAL: The buzzer beeps only at the end of a calibration in the automatic The buzzer beeps only at the end of a calibration in the automatic
operating mode operating mode operating mode

CF PRG
SC BT

ºC-90
ºC-68
Battery state Battery state Battery state
     
and and and to change the field that blinks and the keys to change the field that blinks and the keys to change the field that blinks and the keys
ENTER confirms the last selection. confirms the last selection.
  
NO NO NO YES YES YES
MEM LCD
DT BZ TU
ºF. The ITS-90 or IPTS- ºF. The ITS-90 or IPTS-
ºF-90
ºF-68
normal normal normal
low low low LOW BATTERY LOW BATTERY LOW BATTERY
ENDCAL
T-1200PIR
Display Display Display
---------- ---------- ----------
 
and
Page 9

to