Settings; Overview Of The Dsc Factory Settings - Blaupunkt LONDON RDM 126 Operating Instructions Manual

S-LO To adjust the seek tuning
sensitivity for local recep-
tion.
LO 1 - high sensitivity
LO 3 - low sensitivity
The seek tuning sensitivity
values can be separately set
for AM and FM.
CD/CDC UPD
Use this function to clear
TPM information and CD
names during CD and CDC
operation, in order to have
more storage capacity for
new discs available. See
"Clearing TPM information
and CD names with DSC-
UPDATE".
AUX This menu item is not avail-
able if you have connected
a CD changer (A 05 or
F 05).
The setting made at the fac-
tory is AUX OFF.
If you have connected an
external piece of equipment
via AUX, this function must
be set to AUX ON.
VOL FIX Use this function to select
the volume at which the ra-
dio is set when it is switched
on. Adjust the desired vol-
ume level with << >>. When
adjusted to "VOL 0", the
system will come on with the
volume selected before
switching the radio off.
To quit the DSC programming mode
and store the adjustment:
• Press DSC.
Overview of the DSC factory

settings

TIME 0.00
TIMER 1 TIM 7:00
TIMER 2 TIM 17:00
CD NAME -
LOUDNESS 3
TA VOL 35
SPEECH 0
BEEP 4
ANGLE 0
BRIGHT 16
COLOUR green
LED ON
LEARN KC -
READ KC -
PTY LANG DEUTSCH (German)
SCANTIME 10 sec.
S - DX 1
S - LO 1
CD/CDC UPD -
AUX OFF
VOL FIX 0
59