6. INSTALLATION PROCEDURE
6. INSTALLATION PROCEDURE
6.1 CONNECTING THE POWER CORD AND CABLES
Turn the POWER SWITCH to OFF before connecting the power cord or cables.
Power Cord
Serial I/F Cable (RS-232C)
Parallel I/F Cable
(Centronics)
NOTE:
Different cables cannot be used at the same time.
6.2 HOLDER STAND INSTALLATION
Fit the left and right side holders into the dowels of the holder base and fasten the side holders to the
holder base with the thumbscrews.
Left Side Holder
Holder Base
WARNING!
Dowel
6.1 CONNECTING THE POWER CORD AND CABLES
Expansion I/O Cable
Thumbscrew
6-1
EO1-33017
Fig. 6-1
Right Side Holder
Fig. 6-2