Cleaning And Troubleshooting Your Waterpik; Water Flosser - Waterpik WP-950 Manual

8

CLEANING AND TROUBLESHOOTING YOUR WATERPIK

Orthodontic Tip
To use the orthodontic
tip, gently glide tip along
gumline, pausing briefly
to lightly brush area
between teeth and all around orthodontic bracket,
before proceeding to the next tooth.
Plaque Seeker
®
To use the Plaque
Seeker tip, place
®
the tip close to the
teeth so that the
bristles are gently touching the teeth. Gently glide
tip along gumline, pausing briefly between teeth to
gently brush and allow the water to flow between
the teeth.
Using Mouthwash and
Other Solutions
Your Waterpik Water
®
Flosser can be used to
deliver mouthwash and
antibacterial solutions. After
using any special solution,
rinse unit to prevent
clogging by partially filling
reservoir with warm water
and running unit with tip
pointed into sink until unit
is empty.
Tip
Cleaning
Before cleaning, unplug from the electrical outlet.
Clean the product when necessary by using a soft
cloth and mild non-abrasive cleanser.
The accessory storage container and the water
reservoir are removable for easy cleaning and are
top rack dishwasher safe.
Removing Hard Water Deposits /
General Cleaning
Hard water deposits may build up in your unit,
depending on the mineral content of your water. If
left unattended, it can hinder performance. Cleaning
internal parts: add 2 tablespoons of white vinegar
to a full reservoir of warm water. Point the handle
and tip into sink. Turn unit ON and run until reservoir
is empty. Rinse by repeating with a full reservoir of
clean warm water.
This process should be done every 1 to 3 months to
ensure optimal performance.
Leakage
If leaking due to a damaged hose, replacement
hoses and handles can be purchased from your
local distributor, which can be found at
www.waterpik.co.uk.

WATER FLOSSER

®