Waterpik Waterflosser WP-950 Series Quick Start Manual
Hide thumbs
Also See for Waterflosser WP-950 Series:
- Manual (82 pages) ,
- Instruction manual (23 pages) ,
- Manual (13 pages)
Advertisement
Quick Links
QUICK START GUIDE
WP-950 Series
1
First Use
Power
ON
High
Water ON
This device is only compatible with voltages of 100-240VAC, 50/60Hz
Fill
Fill reservoir with warm
water and replace it
firmly on the base.
Turn pressure to high, point tip into
sink, turn power and water switches
ON until water flows. Turn OFF.
Insert tip firmly
until it clicks
into place.
©2019 Water Pik, Inc.
Advertisement
Related Manuals for Waterpik Waterflosser WP-950 Series
Summary of Contents for Waterpik Waterflosser WP-950 Series
- Page 1 QUICK START GUIDE WP-950 Series First Use Fill Insert tip firmly until it clicks into place. Fill reservoir with warm water and replace it firmly on the base. Power High Turn pressure to high, point tip into sink, turn power and water switches ON until water flows.
- Page 2 QUICK START GUIDE WP-950 Series Water Floss Close lips enough to prevent With power and water switch splashing, while still allowing in OFF position, place tip in water to flow from mouth into mouth. Turn power ON. Turn sink. Start on low pressure and water switch ON.