Included Tools; Figure I-5 3 Mm Hex Driver; Figure I-6 0.375 In. Wrench - Olympus SteerROVER User Manual

10-004209-01EN [Q7750159], Rev. 2, May 2018
Symbol

Included Tools

The included 3 mm hex driver is suitable for typical adjustments of SteerROVER
modules (see Figure i-5 on page 26).
Also included in this kit is a 0.375 in. wrench which is used to remove and install
probe holder buttons (see Figure i-6 on page 26).
The included 3 mm flat driver (see Figure i-7 on page 27) is useful for releasing the
flaps of the raster arm's cable tray.
26 Introduction
Alerts user that view has changed to a reverse angle.
Figure i‑5 3 mm hex driver
Figure i‑6 0.375 in. wrench
Description