External Headset; Charging And Battery Maintenance - Baofeng UV-5RV2+ Operating Manual

External Headset

Plug the external micro-headset connector into the jack of 'SP & MIC' of
the transceiver as shown in the figure provided on the right.

Charging and Battery Maintenance

Charging the Battery
Follow the steps below to setup and use the battery charger.
1. Plug the end of the power adapter into the charge base.
2. Plug the power adapter into an electrical wall outlet.
3. Place the radio or battery in the charging slot on the charger.
4. Make sure the contact plates of the battery are making contact with the charger. Ensure that the
radio fits snugly into the charging dock. When the red LED stays on, the radio is charging.
5. The radio is fully charged once the LED on the charger stays green. Please remove the radio after
it is fully charged to avoid over-charging the battery.
http://baofengradio.us 9