Output Power (Energy Storage) Connection; Control Accuracy - Current And Voltage Control Performance Data; Control Unit Connection Data; Optical Components - ABB ACS880-1604 Hardware Manual

Industrial drives dc/dc converter modules
Hide thumbs Also See for ACS880-1604:
Table of Contents

Advertisement

Input terminals

Output power (energy storage) connection

Voltage (U
)
2
Current
Output terminals
Maximum energy storage
cable length
Control accuracy – Current and voltage control
performance data
Current control dynamic re-
sponse
Current control accuracy
(static)
ES voltage control accuracy
(static)

Control unit connection data

See
Control units of the

Optical components

The specifications of the optic cable are as follows:
Storage temperature: -55 ... +85 °C (-67 ... +185 °F)
R8i module: M12, maximum intrusion into module 20 mm (0.8").
BDCL filter: M10, maximum intrusion into module 20 mm (0.8").
ACS880-104-xxxxx-3 = Maximum output voltage 50 V...95% of U
DC voltage in the DC bus). This is indicated in the type designation label as
typical output voltage range 50...509 V DC.
Recommended output voltage 150 V...80% of U
ACS880-104-xxxxx-5 = Maximum output voltage 50 V...95% of U
DC voltage in the DC bus). This is indicated in the type designation label as
typical output voltage range 50...509 / 611 / 636 V DC.
Recommended output voltage 150 V...80% of U
ACS880-104-xxxxx-7 = Maximum output voltage 50 V...95% of U
DC voltage in the DC bus). This is indicated in the type designation label as
typical output voltage range 50...668 / 764 / 878 V DC.
Recommended output voltage 150 V...80% of U
See section
Ratings (page
R8i module:
Busbars to quick connector: M12. Torque: 50 N·m (37 lbf·ft).
Busbars to support insulators: M8. Torque: 9 N·m (6.5 lbf·ft).
Cables to busbars: M12. Torque: 70 N·m (52 lbf·ft).
Busbar to BDCL filter: M10. Torque: 42 N·m (31 lbf·ft).
100 m (328 ft)
Step response time < 10 ms for a reference step 0% to 50% of the drive
nominal current
Current error < 1% of the drive nominal current rating
For the DC current ripple, see
Voltage error < 1% of the drive nominal voltage (converter with the optional
BAMU voltage/current measurement unit)
Note: If the converter does not include the BAMU voltage/current measure-
ment unit, the voltage measurement accuracy depends on the customer's
measurement device.
drive.
.
DC
.
DC
.
DC
135).
Ratings (page
135).
Technical data 143
(Drive
DC
(Drive
DC
(Drive
DC

Advertisement

Table of Contents
loading

Table of Contents