Display Mask - Toshiba SATELLITE A200 Maintenance Manual

4.11 Display Mask

Removing the Display Mask
To remove the display mask, first remove the display assembly as described earlier, and then
follow the steps below:
1. Remove four rubber pads to reveal the four M2.5x6 screws securing the display mask to
the LCD module.
2. Remove the four M2.5x6 black screws securing the display mask.
Minnesota 10M/10MG Series Maintenance Manual
Figure 4-35 Removing the rubber pads
Figure 4-36 Removing the display mask screws
4 Replacement Procedures
4-33