Figure; Removing The Dc-In Connector; Removing The System Board - Toshiba SATELLITE A200 Maintenance Manual

4 Replacement Procedures
4.25 System Board

Removing the System Board

To remove the system board, first remove the display assembly, keyboard, top cover, MDC
card, USB board, wireless module, and system fan. Then follow the steps below:
1. Unhook and remove the VGA cable.

Figure 4-74

Removing the VGA cable
2. Unhook the DC-IN connector from its socket.
Figure 4-75

Removing the DC-IN connector

4-60 Minnesota 10M/10MG Series Maintenance Manual