The Diagnostic Test - Toshiba SATELLITE A200 Maintenance Manual

3.1 The Diagnostic Test

This chapter explains how to use the Test & Diagnostic program to test the functions of the
(Base on Minnesota 10M&10MG T&D version 1.0) hardware modules. The Test & Diagnostic
Program is stored on the T&D diskettes. The program consists of a series of tests that run
automatically when the Diagnostics Program items are selected and executed.
NOTES: To start the diagnostics, follow these steps
1. Check all cables for loose connections.
2. Exit this program when you are at Main Menu.
The TEST & DIAGNOSTIC PROGRAM contains the following functional tests:
CONFIG CHECK TEST
SPEAKER AUDIO TEST
FAN ON/OFF TEST
MAIN BATTERY CHARGE TEST
FDD TEST
ODD TEST
KEYBOARD TEST
MOUSE(PAD) TEST
LCD PIXELS MODE TEST
MAGNETIC SWITCH TEST
LAN TEST
RTC TEST
IEEE1394 CODE TEST
Speaker EQ Check & Rewrite
Button Test
1st HDD TEST
nd
2 HDD Test
Satellite LED Test
Satellite A205/A200 /Satellite Pro A200/EQUIUM A200/ SATEGO A200 Series Maintenance Manual
3. Tests and Diagnostics
3-3