Table of Contents
Advertisement
Chapter 2
Installing the 8660 SDM
This chapter provides instructions for installing and connecting the 8660 SDM in
an 8003, 8006, 8010, or 8010co chassis. This chapter includes the following
topics:
Topic
Chassis configuration requirements
Slots in the 8003, 8006, and 8010 chassis are numbered from the top down,
starting with slot 1. Slots in the 8010co chassis are numbered from left to right
starting with slot 1.
In the 8006, 8010, and 8010co chassis, slots 5 and 6 are reserved for the 8690SF,
8691SF, or 8692SF Routing Switch Fabric Modules. In the 8003 chassis, slot 3 is
reserved for the 8690SF, 8691SF, or 8692SF module.
You can install any of the supported 8600 modules in the remaining chassis slots.
For information on the Ethernet Routing Switch 8600 modules, see Installing
8600 Switch Modules.
Installing the 8660 Service Delivery Module (SDM)
27
Page
27
28
28
31
42
Advertisement
Table of Contents
