Television - Toshiba Satellite A60 User Manual

NOTE: The Resume feature can be used with an external monitor. Simply
enable Resume and the computer will maintain the data as it is displayed
on the external monitor.
1. Connect the monitor to the external monitor port.
2. Turn the monitor's power on.
When you turn on the power, the computer automatically recognizes the monitor
and determines whether it is color or monochrome.
You can use the HW Setup to select between Auto-Selected and Simulta-
neous displays. Refer to Chapter 7,
If you have selected Simultaneous under the Display options of the HW
Setup, both the external monitor and the internal LCD will be active when you turn
on the computer. If Auto-Selected is selected, only the external monitor will be
active.
To change the display settings, press Fn + F5. If you disconnect the monitor
before you turn the computer off, be sure to press Fn + F5 to switch to the internal
display. Refer to Chapter 5,
the display setting.
NOTE: If you set Simultaneous for the computer's display, you must
set the computer's display resolution to the same as that of the external
monitor or other device, such as a projector.

Television

A television can be connected to the video out port on the computer. To connect a
television, follow the steps below.
1. Turn the computer off.
2. Use a video cable (not supplied) to connect the television to the video out
port.
HW Setup and
The Keyboard, for details on using hotkeys to change
Television
Passwords.
8-11