Toshiba Satellite A60 User Manual page 140

User's Manual
Parallel/Printer
This tab lets you set the Printer Port Type. Use the Windows Device Manager to
make settings for the Parallel port.
Parallel Port Mode
The options in this tab are ECP and Standard Bidirectional.
ECP
Standard
Bidirectional
Display
This tab lets you customize your computer's display settings for either the internal
LCD screen or for an external monitor.
Power On Display
Lets you set the display to be used when the computer is booted.
Auto-Selected
LCD+AnalogRGB
CPU
Dynamic CPU Frequency Mode
This option lets you choose from the following settings:
Dynamically Switchable
Always High
7-4
Sets the port type to Extended Capabilities Port (ECP). For
most printers, the port should be set to ECP. (Default)
This setting should be used with some other parallel
devices.
Selects an external monitor if one is connected.
Otherwise, it selects the internal LCD. (Default)
Selects both the internal LCD and external monitor for
simultaneous display.
CPU power consumption and clock speed
automatic switching function is enabled.
When the computer is in use, CPU operation
is automatically switched when necessary.
(Default)
CPU power consumption and clock speed
automatic switching function is disabled. The
CPU always runs at its fastest speed.