Toshiba Satellite A60 User Manual page 213

When installing Wireless LAN cards, the channel configuration is managed as
follows:
For wireless clients that operate in a Wireless LAN Infrastructure, the
Wireless LAN card will automatically start operation at the channel
identified by the Wireless LAN Access Point. When roaming between
different access points the station can dynamically switch to another
channel if required.
For Wireless LAN cards installed in wireless clients operating in a peer-to-
peer mode, the card will use the default channel 10.
In a Wireless LAN Access Point, the Wireless LAN card will use the
factoryset default channel (printed in bold), unless the LAN Administrator
selected a different channel when configuring the Wireless LAN Access
Point device.
Wireless IEEE 802.11 Channels Sets (Revision A)
Frequency Range Channel ID
36
40
44
48
52
56
60
64
149
153
157
161
* Available Area: US (USA, CANADA) only
A peer-to-peer mode is available under the following condition:
A Wireless LAN card receives a "US county/region code" beacon of the standard
IEEE 802.11 (Revision D) from a Wireless LAN Access Point.
5150-5850 MHz
5180
5200
5220
5240
5260
5280
5300
5320
5745
5765
5785
5805
Appendix F
Note
US only *
US only *
US only *
US only *
F-3