Toshiba Satellite A60 User Manual page 150

2. Remove all cables connected to the computer.
3. Turn the computer upside down and remove the battery pack (refer to Chapter
6, Power and Power-Up
4. Remove one screw securing the memory module cover.
5. Lift off the cover.
NOTE: Use a point size 0 Flippest screwdriver.
6. Insert the memory module into the connector on the computer. Press the
module carefully and firmly to ensure a solid connection.
7. Push the module down so that it lies flat and is secured by two latches.
CAUTION: Do not touch the connectors on the memory module or on the
computer. Debris on the connectors may cause memory access problems.
Figure 8-6 Inserting the memory module
Modes.)
Figure 8-5 Removing the cover
Memory expansion
8-7