Table of Contents
Advertisement
"Comm Port" settings, which depends on the COM port you are using. Click
"OK" when complete.
Figure 33: Communications Options Window
Next, select the "Setup...File Locations" menu item from the main screen. The
"Choose File Locations" window shown in Figure 34 then appears. Confirm that
the correct paths to the referenced files are entered. Enter the correct paths if
necessary.
Figure 34: Choose File Locations Window
14.3.3 Transmitting Firmware Files
When a board support package (BSP) has been downloaded and unzipped, the
flash firmware file will be the one with ".BIN" as its file name extension.
94
Advertisement
Table of Contents
