Advertisement
Hooking Up the Filter
1. Make sure the filter is turned off (the Power Switch is in the down OFF position and
the Power Cable is removed).
2. Using power cables (only a power cable for the filter is supplied with this product)
connect your audio-video equipment to the power sockets.
Follow the below recommendations:
FILTERED SOCKETS (these sockets are filtered. Electrical noises are filtered and
limited) – connect here your audio-video sources (CD/DVD/BluRay/Media Player,
Radio/TV Tuner, Digital-to-Analog Converter, Turntable, Preamplifier, Active Speakers
etc.) and video display devices (TV Set, Video Projector etc.).
DIRECT SOCKETS (these sockets are not filtered) – connect here your amplification
audio equipment (Integrated/Power Amplifier, AV/Stereo Receiver, Active Subwoofer
and similar)
Note! Check „Operation" for more information about the correct Phase when
connecting audio-video equipment.
3. Your filter is ready for operation.
We recommend to use Schuko plugs in all power cables.
Total maximum power load: the total maximum power consumption
for all connected devices to the filter should not exceed the maximum
power load for this filter.
The total maximum power load for this filtrer is given in Kilowatts (kW)
or Watts (W) and is printed on the filter. It is also available in the speci-
fications on www.TagaHarmony.com
6
/PF-2000 model shown/
Power cable
Power cable
Advertisement
