Related Manuals for Taga Harmony PF-2000
Summary of Contents for Taga Harmony PF-2000
- Page 1 PF Series [230-240V] POWER NOISE FILTERS FOR USE WITH AUDIO-VIDEO EQUIPMENT Instruction Manual Edition 05-18...
-
Page 2: Table Of Contents
This dirty electricity can have a negative effect on performance of your audio-video system and even affect its life. TAGA Harmony power filter limits noises from your electricity as well as isolates sound and video sources from the soiled electrical network as well as indicates the correct power phase –... -
Page 3: Safety Instructions
Safety Instructions IMPORTANT READ THIS SECTION CAREFULLY BEFORE PROCEEDING! WARNING: TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK, DO NOT EXPOSE THIS PRODUCT TO RAIN OR MOISTURE. DO NOT REMOVE CHASSIS (OR BACK). NO USER-SERVICEABLE PARTS INSIDE. REFER SERVICING TO QUALIFIED SERVICE PERSONNEL. The triangle containing a lightning symbol is intended to alert the user to the presence of uninsulated dangerous voltages within the product’s enclosure that may be of sufficient magnitude to constitute a risk of electric shock to persons. -
Page 4: Important Safety Instructions
Important Safety Instructions... -
Page 5: Controls And Displays
Controls and Displays FLOOR MODELS /PF-1000 model shown/ SHELF MODELS /PF-2000 model shown/ 1. Power Switch (ON and OFF) 2. Power Indicator 3. Phase Indicator 4. Reset Button 5. Voltage Meter Display 6. Power Cable Input 7. Power Sockets - DIRECT Output (non-filtered) -
Page 6: Hooking Up The Filter
Hooking Up the Filter Power cable Power cable 1. Make sure the filter is turned off (the Power Switch is in the down OFF position and the Power Cable is removed). 2. Using power cables (only a power cable for the filter is supplied with this product) connect your audio-video equipment to the power sockets. -
Page 7: Operation
Operation Note! This unit requires a single-phase 3-conductor electrical outlet. Plug the Power Cable to the filter and into the electrical outlet. Turn on the filter (the Power Switch should be in the upper ON position). The Power Indicator should light up – if not then check the connection to the electrical outlet and whether it is powered. -
Page 8: Specifications
(check rear of the filter or specifications). Press the RESET button to restore the power supply. Note! When you want to turn off the power filter we recommend to turn off your audio-video equipment firstly. Specifications PF-2000 PF-1000 Max Spike Volt 3000V Max Surge Current... -
Page 9: Kit Content
We strongly advise to contact a professional installer or dealer in order to install TAGA Harmony products. We recommend using high quality TAGA Harmony cables and other installation accessories. Kit Content: Power Filter Power Cable Instruction Manual Your product is marked with the symbol as showed on the left.