Advertisement
Operation
If your audio-video equipment has the phase marking for the power cable input make
sure to connect correctly the equipment power cable plug to the power filter.
5.
Turn on your audio-video equipment and enjoy your system.
6.
Reset – the Power Output Sockets will be powered off when the maximum power
load is exceeded (check on the rear of the filter or in specifications).
Press the RESET button to restore the power supply.
7.
Voltage Meter - whenever the power filter is turned on and connected to a
properly working electrical outlet the Voltage Meter will be displaying approximate
current voltage in Volts.
Note! The results of Voltage Meter measurement accuracy are highly approximate
and should not be taken into account for the professional assessment of the power
line quality.
• When you want to turn off the power filter we recommend to turn off
• This power filter is not a uninterruptible power supply unit (UPS).
8
your audio-video equipment firstly.
It will not operate when the input power source fails (no power
or too low voltage).
Advertisement
