Test Pattern Screen; Still Load/Delete Screen; Capture/Freeze/Logo Screen - Roland VR-50HD MK II Reference Manual

Menu List

Test Pattern screen

Menu item Value
(bold text: default value)
OFF, 75% Color Bar. 100% Color Bar
Test Pattern
Ramp, Step, Hatch, Frame
Test Tone OFF, ON

Still Load/Delete screen

Here you can load a still image from a USB flash drive, or delete a loaded still image.
Menu item Value
(bold text: default value)
Load
—
Delete
—
Reload
—

Capture/Freeze/Logo Screen

Here you can specify the function of the [FREEZE/USER LOGO] button, and capture a still image from the video output.
Menu item Value
(bold text: default value)
Freeze/User Logo
Specifies the function of the [FREEZE/USER LOGO] button.
Freeze
Mode
User Logo
Touch to access the Still Select screen.
Still
1–4
Output Capture
PGM, AUX
Source
Touch to access the Still Select screen.
Still
1–4
Execute
—
52
(Press the [MENU] button0touch Video <Test Pattern>)
Explanation
Specifies the test pattern.
Turns the test tone on/off.
([MENU] button0Video <Still Load/Delete>)
Explanation
Shows a list of the still images saved in the root directory of the USB flash drive. You can select a still
image and load it into the unit.
Formats supported for loading
Format Windows Bitmap file (.bmp), 24-bit color, uncompressed
Resolution Maximum 1920 x 1080 pixels
Up to eight single-byte alphanumeric characters
File name
* The extension ".bmp" must be added.
* The still image is temporarily saved in the unit. When you turn off the power, the still image is deleted.
* You can make the previously-loaded still image be automatically loaded when this unit starts. Save
the same file in the root directory of the USB flash drive, and start this unit with the USB flash drive
connected.
Deletes the still image that is loaded into the unit.
Reloads a still image from the USB flash drive.
([MENU] button0Video <Capture/Freeze/Logo>)
Explanation
Temporarily pauses the program output video (freeze function).
Temporarily stops the program output, and outputs the specified still image.
Selects the still image that is assigned to the [FREEZE/USER LOGO] button.
Specifies the video bus on which still image capture is used.
Specifies the save-destination for the captured still image.
* The still image is temporarily saved in the unit. When you turn off the power, the still image is deleted.
Capture a still image from the output video.