Usb Audio - Roland V-Drums TD-50 Data List

SETUP

USB AUDIO

Parameter
Input Gain
Volume Select
Input MAIN, SUB
Output Gain
Driver Mode
OPTION
Parameter
PREVIEW tab
Preview Mode
Velocity
MIX IN tab
The MIX IN jack can be used not only as a stereo input but also as mono input x2.
For example, if the click sound is being played through the L-channel of the MIX IN jack and the backing through the R-channel, set Mode to "MONO" so that the click and backing
are both heard from the center.
This setting is common to the front panel and rear panel MIX IN jacks.
Input
Mode
Gain
LCD tab
Contrast
Brightness
GUIDE tab
Guide Display Sw
30
Value
-36–+12 dB
Specifies the knob that adjusts the input volume of USB audio (Input MAIN, SUB).
OFF
SONG
CLICK
-24–+24 dB
Switches between the TD-50's dedicated USB driver and the driver provided by your operating system.
MEMO
The setting takes effect when the TD-50 is powered off and on again.
GENERIC
VENDOR
Value
Specifies how the sound is played when the [PREVIEW] button is pressed.
FIXED
DRUM KIT
1–127+32
Selects the jack(s) to use as an input.
L + R
L ONLY
R ONLY
STEREO
MONO
0, +6, +12 dB
1–16
1–16
OFF, ON
Explanation
Adjusts the input level
This setting is common to Input MAIN and SUB.
The volume is not adjusted by a knob.
The [SONG] knob adjusts the volume.
The [CLICK] knob adjusts the volume.
Adjusts the output level
This setting is common to all outputs.
Use the driver provided by the operating system.
Operation is limited to USB MIDI.
Use the TD-50's dedicated driver provided by Roland. USB MIDI and USB audio can be used.
Explanation
The sound is heard at a fixed volume regardless of how strongly the button is pressed.
The velocity changes depending on how strongly the button is pressed.
The velocity changes in the range of 1–127 according to the pad that is connected. For a digitally
connected pad, the velocity changes in the range of 1–127+32.
Velocity when Preview Mode is set to "FIXED"
Use both channels
Use only the left channel
Use only the right channel
Use as stereo input
Use as monaural x 2
Adjusts the input level
Display contrast
Display brightness
Specifies whether the guide is shown (ON) or not shown (OFF) on the screen when switching pages.